3. Testing and Modification


3.1 Trial Test and Design Modification



Run Number
Run 1
Rerun 1
Rerun 2
Total time of Run
2 sec
4 sec
5 sec
Total distance of Run
0.5m
4m
5.4m
Time for lever to fully release
1 sec
3 sec
2 sec   
Distance car travels while lever is releasing    
0.1m
1.7 m
2m
Observations – did car travel smoothly, straight, always forward, etc?

- Went straight, but curved towards the right after a while
Went straight, but curved towards the right after a while
Went straight, but curved towards the right after a while
Did lever / string operate smoothly?    
Yes
Yes
Yes
Filename of video recorded is:    
BI1
BI2
BI3
Area for improvement (1 only)    
Back wheels rotate on the spot
Back wheels drifted slightly when mousetrap is released
Lever seems to be release too quickly
Possible reason (1 only)    
Mousetrap arm pulled all the way back (too much power, wheels spin on the spot)
No traction between back wheels and floor
Coils around back axle were not tight enough
Modification made (1 only)    
Reduce the angle of the mousetrap arm when lifted
Wrap rubber around the circumference of the wheel
Loop the twine parallel to one another, with no spaces in between

MODIFICATION  (New Google-sketchup)



















3.2 Test Data

1.     All relevant measurements of your car (after modification).

Mass of car
320.2g
Mass of each wheel
Front wheel: 35.33g
Back wheel: 49.33g
Wheel diameter
Front wheel: 4.2cm
Back wheel: 12cm
Axle diameter
0.5cm
Length of string (power stroke)
44.6cm
Approx. number of wraps of string
10
Length of lever extension
Not Applicable
Overall length
37.5cm
Overall width
30.5cm
Overall height
12.2cm


2. Data tables showing the results of all 3 trials.

Run Number
1
2
3
Total time of Run
5 sec
6 sec
6 sec
Total distance of Run
6.7m
6m
5.8m
Time for lever to fully release    
3 sec
3 sec
3 sec
Distance car travels while lever is releasing    
2.05m
2.2m
2.3m
Observations – did car travel smoothly, straight, always forward, etc?
Went straight, but curved towards the right after a while

Went straight, but curved towards the right after a while

Went straight, but curved towards the right after a while

Did lever / string operate smoothly?    
Yes
Yes
Yes
Filename of video recorded is:    
AI1
AI2
AI3
* After modification trials

3.3 Video Clips  

At least 3 best videos are recorded and uploaded into Youtube.



No comments:

Post a Comment